Related Magazines Related Associations Related Books
hot key words: Drying equipment flash dryer spray dryer sludge dryer fluidized fluid bed belt dryer paddle dryer disc dryer vibrating screen centrifugal pump disperser
Your present location: Home >> Tech Channel >> Industry Knowledge >> How to Control the Flow of FRP Centrifugal Fan

How to control the flow of FRP centrifugal fan

Release time: 2019/11/4 Click times: 2416

In the process of running FRP centrifugal fans, flow control is very important. So how do we control the flow?

The glass fiber reinforced plastic centrifugal fan can use ordinary glass fiber reinforced plastic centrifugal fans, which can continuously work for 30 minutes when the temperature of the conveying medium is 280 C, and can continue to operate normally when the medium temperature is cooled to the ambient temperature. Doors, windows, and walls may appear during the initial ventilation In case of dew condensation and slight dew on the surface of the grain, as long as the fan is stopped, the window is opened, the fan is turned on, and the hot and humid air in the warehouse is discharged outside the warehouse. Condensation will not occur when using FRP centrifugal fan for slow ventilation. Only the temperature of grains will rise slowly.

After the FRP centrifugal fan is installed and started to operate, or the flow is too large or too small during use, the following methods can be used to adjust the flow:
1) Use a throttling device to adjust the flow.
2) Change the fan speed to adjust the flow.
3) Exchange the fan with higher or lower pressure to adjust the flow.
4) Change the pipe network resistance coefficient to adjust the flow.
It must be pointed out that the throttling device is generally used to adjust the flow. But when the actual flow is much larger than the required flow, this method wastes too much power, which is very uneconomical. If conditions permit, usually reduce the fan speed or replace the fan with a lower pressure.

[Source: Suzhou Dingyu Energy Saving Equipment Co., Ltd.] [ Favorite this page ] [ Print this page ] [ Close ]
  • ① All works marked "Source: Chemical Machinery Network" on this website, the copyright belongs to Chemical Machinery Network, please reprint the website of Chemical Machinery (http://z-han.com). Violators of this website will be held responsible for relevant legal responsibilities.
  • ② All works on this website that do not indicate "Source: Chemical Machinery Network" are reproduced from other carriers. The purpose of reprinting is to convey more information, and does not mean that this website agrees with its views or confirms the authenticity of its content. When other media, websites or individuals use this work from this website, they shall bear their own legal responsibilities such as copyright.
  • ③ All information published on this website does not declare or guarantee the correctness or reliability of its content; you hereby accept and acknowledge that the risks arising from relying on any information shall be borne by yourself.
  • ④ If you are involved in the content of the work, copyright or other issues, please contact this website within one week from the date of publication of the work, otherwise it is deemed to waive the relevant rights.
About Us - Contact Us - Announcement - Terms of Service - Site Help - Business Services - Legal Statement - Legal Counsel - Friend Links - Online Consulting - Site Map
National Customer Service Hotline: 400-667-8871
Copyright ? 2004-2013 Chemical Machinery Network z-han.com Jiangsu Dongwang Information Technology Co., Ltd. All rights reserved
  • Advertising business (image advertising, membership application): 400-667-8871
  • Equipment procurement (equipment procurement, shopping guide consultation): 400-667-8871
  • Information editor (member review, information release): 400-667-8871
  • Media cooperation (exhibitions, associations, magazines): 400-667-8871
  • Human resources: 400-667-8871
  • Fax: 0519-89897519
Su ICP prepares 05005804 value-added telecommunications business license Su B2-20110228 E-mail: